The RGBDuino is an Arduino Uno compatible board with 2 built in 5050 RGB LEDs , a speaker, and LEDs on the digital output pins. Check out my review and comment below if you’re interested in getting one for FREE!
External News
DIY – How to make 1:150 micro RC Car
I modified the TOMYTEC “THE Car Collection” 1/150 TOYOTA CROWN to work with a remote control. The car is controlled by a self-made infrared remote control.
The remote control format is proprietary.
The battery installed in the car is a lithium polymer battery(3.7V 40mAh).
I used motors by removing weights of the vibration motors.
In order to write the program of the microcontroller(ATtiny1616) used on the car, you need ATMEL STUDIO 7 or later and a device that can use UPDI.
I use MPLAB PICkit 4. AVRISP mkII cannot be used.
3D printed Halbach Motor – Building Instructions
Step by step instructions for making the 600W, 3d-printed Halbach array brushless motor.
Overview and building instructions: https://www.instructables.com/id/600-…
This is the BIGGEST month for VR in 2020
There’s a ton of stuff happening this month in VR and i would pretty much say this is the biggest month of the entire year, arguably even more important than the launch of Half Life Alyx.
Alternative-meat startup is hoping a 3D-printed steak can upend the meat industry
It may look like Play-Doh. But it’s actually a 3D-printed steak.
It’s made by the Israeli alternative-meat startup Redefine Meat, and the technology behind it is one of many contenders in today’s sizzling-hot international race to capitalize on the growing faux-meat market.
Redefine Meat isn’t focusing on alternatives to ground beef or sausages, but whole-cut steaks — an area of the market that has yet to hit the mainstream.
Retroid Pocket 2 – The Best Retro Device Under $80 (N64/PS1/DC/DS/PSP)
The Retroid Pocket 2 is one of the newest and most popular retro gaming handhelds of 2020. With six styles to choose from at a very competitive price, is the RP2 worthy of picking up? In this review, I cover the build quality, software, and emulation performance of the Retroid Pocket 2.
Arduino CNC Foam Cutting Machine (Complete Guide)
In this video we will learn how to build an Arduino CNC foam cutting machine. This is a typical DIY CNC machine because it’s made out of simple and cheap materials, some 3D printed parts and it has an Arduino as a controller.
How to fine-tune pfSense 2.4.5 for 1Gbit throughput on APU2/APU3/APU4
Background information
APU2, APU3 and APU4 have four 1Ghz CPU cores, pfSense by default uses only 1 core per connection. This limitation still exists, however, a single-core performance has considerably improved. With new BIOS, and settings described below, pfSense can route about 750-800Mbit/s on one connection.
APU2*4 have very performant Intel I210-AT Network Interfaces. These NICs have 4 transmit and four receive queues, being able to work simultaneously on 4 connections. With some fine0tuning, pfSense can take advantage of this and route at 1Gbit when using more than one connection.
A Raspberry Pi 4 Laptop! CrowPi2 First Look
In this video, we take look at the all-new CrowPi2 Raspberry Pi Laptop. With an 11.6 Inch 1080P display and powered by the Raspberry Pi 4 this is an interesting little laptop.
In this video we unbox and test out the CRowPi2 with the included CrowPi Software an by the end we even test out RetroPie on this laptop.
Computer gaming with friends in the 90’s
A look back in the time portal, of when things were much simpler. Several friends gather to play various computer video games of the 90’s.