This is the Best cooler I’ve ever tested for the Raspberry Pi 4 3 or 3b+ its called the Ice Tower and it lives up to its name! An insane Tower cooler for the Raspberry Pi 4 is something we really didn’t need but always wanted. In this video, I test out the thermal performance on the Ice Tower cooler for the Raspberry Pi 4 Raspberry 3 and The Raspberry Pi 3 plus. Sorry for the quick re-upload, The last chart was a little messed up in the original.
Buy on Amazon
Smaller than an Oreo, Faster than a Raspberry Pi
The NanoPI-NEO2 is a newly released super tiny ARM board by Friendly Elec. It uses Allwinner’s 64-bit H5 quad-core SoC (ARM Cortex-A53). It has internal hexa-core Mail450 GPU, 512M DDR3 RAM. A Ubuntu Core and Armbian image files are ready for it.
The NanoPi NEO2 inherits NEO’s form factor and has compatible interfaces and ports with NEO. In addition in such a small dimension it has Gbps Ethernet and one USB host port. These features make it especially suitable for applications that require high data throughput, speedy data transmission and high performance. Hobbyists and makers will just love it.
Star Wars Fans Direct Traffic With Lightsabers During New York Blackout
On Saturday night, a power failure in New York City left the West Side of Manhattan in the dark. Some of the city’s denizens became trapped in subway cars. Others had to navigate the roads of the city without the aid of streetlights or stoplights. Some good Samaritans took to the streets, using what light sources they could find to help direct traffic through the city. These included cell phones as well as lightsaber blades.
Raspberry pi 4 Retro Gameplay play on Kodi Image
Raspberry pi 4 Retro Gameplay retro game play on Kodi Build #raspberrypi4#retrogaming#kiodiekin#Retropie#Raspberrypi Brief gameplay retrograding on the pi4 4gb model live streamed. Unit didn’t get too hot small heat sink.
Analysis of 3D-Printer Power Consumption Using Creality CR-10. TL;DR: 24/7 Operation = 2¢/Hour
Rob Cockerham has an interesting analysis of the power demands of his CR-10 3D-printer – when only the fans are running, when the nozzle is operating at 185°C, the heating bed is maintained at 45°C, and while the printer is operating on 2 axes.
A Nintendo NES out of Wood!
“Make Something” tears apart an old Nintendo NES and remake the case out of fancy wood.
Nike Unveils Design for Nintendo 64-Inspired Sneakers!
If you’re anything like me and practically live in your sneakers, then you’re going to love these! Nike has unveiled a new Nintendo 64-inspired design for the Air Max 97. They look pretty snazzy with a very familiar color palette of grey, red, yellow, green and blue. If you have ever held an N64 controller in your hands, the inspiration for this fancy footwear is obvious.
$40 PrePaid Android Phone For Emulation – Better than The BittBoy & LDK Game
A $40 Pre Paid Android Phone for handheld emulation? Yes, this little thing actually does an amazing job with some of my favorite emulators like N64 SNES PlayStation 1 Nintendo DS and even Dreamcast!
The WiIko Ride will absolutely destroy the LDK Game BittBoy Pocket GO and pretty much any other Chinese emulation handheld like the RS97
Honey, I Shrunk the Raspberry Pi!
The Raspberry Pi is available in a couple of form factors. There is the standard Model B (85.6 x 56.6mm) with a full complement of I/O connectors.
If you are willing to give up some features, you can get the squarish A+ model (65 x 56mm), the Compute Module form factor (67.6 x 30mm), or even the ultra-compact Pi Zero (30 x 65mm).