A new Nintendo leak has revealed an alleged portable GameCube console. That’s right, Nintendo was apparently experimenting with a portable version of the GameCube, though it’s unclear how exactly this would have been realized. As you may know, 2020 has been a prolific year for Nintendo leaks, and it looks like Nintendo’s leaky ship isn’t entirely plugged yet, because a new leak has surfaced online, and is currently making the rounds.
The RGBDuino is an Arduino Uno compatible board with 2 built in 5050 RGB LEDs , a speaker, and LEDs on the digital output pins. Check out my review and comment below if you’re interested in getting one for FREE!
I modified the TOMYTEC “THE Car Collection” 1/150 TOYOTA CROWN to work with a remote control. The car is controlled by a self-made infrared remote control.
The remote control format is proprietary.
The battery installed in the car is a lithium polymer battery(3.7V 40mAh).
I used motors by removing weights of the vibration motors.
In order to write the program of the microcontroller(ATtiny1616) used on the car, you need ATMEL STUDIO 7 or later and a device that can use UPDI.
I use MPLAB PICkit 4. AVRISP mkII cannot be used.
Step by step instructions for making the 600W, 3d-printed Halbach array brushless motor.
Overview and building instructions: https://www.instructables.com/id/600-…
There’s a ton of stuff happening this month in VR and i would pretty much say this is the biggest month of the entire year, arguably even more important than the launch of Half Life Alyx.
It may look like Play-Doh. But it’s actually a 3D-printed steak.
It’s made by the Israeli alternative-meat startup Redefine Meat, and the technology behind it is one of many contenders in today’s sizzling-hot international race to capitalize on the growing faux-meat market.
Redefine Meat isn’t focusing on alternatives to ground beef or sausages, but whole-cut steaks — an area of the market that has yet to hit the mainstream.
The Retroid Pocket 2 is one of the newest and most popular retro gaming handhelds of 2020. With six styles to choose from at a very competitive price, is the RP2 worthy of picking up? In this review, I cover the build quality, software, and emulation performance of the Retroid Pocket 2.
In this video we will learn how to build an Arduino CNC foam cutting machine. This is a typical DIY CNC machine because it’s made out of simple and cheap materials, some 3D printed parts and it has an Arduino as a controller.