I’m working on a walk through of all my Christmas lights and Props I used in last year as well as this years show. This can all be found in our Community Forums.
My Christmas Light display and props
Fix stringing on your Ender 3
I came across this video and wanted to share. Having stringing issues on your Ender 3? Try this in your slicer settings!
OctoPrint-TFT for Raspberry Pi Touch Screens
Setting up OctoPrint-TFT on your Raspberry Pi can be found in our community forums.
Here
PinkyPi v1 together!
I finally got PinkyPi v1 put together and booting! I’ve played a few games on it so far to test everything out, though I am having audio issues. I fear I broke the negative wire going to the speaker during assembly.
Check out the build log in our forums!
PinkyPi
My Arduino based WS2811 RGB Christmas light show setup.
I’m working on a full write up of my Christmas light show from 2018, my second year doing Christmas lights.
You can find the article in our forums.
I’ve also provided the Arduino source code I used in my setup, for both Relay control as well as WS2811 RGB LED control.
This software interfaces with Vixen 3 running on a computer in my garage and allows Vixen to talk to the Arduinos and control my display.
[download id=”420″]
[download id=”422″]
My Thingiverse Profile
Find me on Thingiverse, and get all the files I’ve made in my various projects.
I’m still new to the hobby, but adding items as often as possible.
My Thingiverse Profile
CoinFX
CoinFX is back and up for download!
CoinFX is a sound effect application that plays coin box sounds for your MAME arcade system. Press your coin button and it will make the sounds of the coin chute and box. Sounds change as the coin counters increase, giving the effect your coin box is filling up.
CoinFX on our community forums.
[download id=”396″]
TinyPi Pro – My inspiration for PinkyPi
TinyPi Pro is a gameboy style vertical Raspberry Pi Zero mini emulation console.
This wonderful little device has extra buttons for a wider range of games, as well as a kit you can purchase with premade PCBs for assembly.
Check out their Kickstarter as well as additional information below!
TinyPi Pro on Sudomod.com
PinkyPi vs 1.0 nearing completion!
I was able to get several kinks worked out of the design for the middle and bottom layer of the case for the PinkyPi v1.0. I’ve since printed the new sections and everything fits together as expected!
I’ll be continuing my build log in our forums, found here.
PinkyPi v.10