PinkyPi 1.1 is on the hot bed!

I made just a couple very small changes to the case layout for PinkyPi 1.1, a small groove to line up the sections abit better and closing up the micro USB and HDMI ports a little.

I do still want to do some more design to the inside of the base, to hold the battery charging module firmly in place, another notch or two to help secure the layers / sections together, some possible bracing in the middle layer and a possible redesign of the A and B buttons.

My Arduino based WS2811 RGB Christmas light show setup.

I’m working on a full write up of my Christmas light show from 2018, my second year doing Christmas lights.
You can find the article in our forums.

Christmas Light setup – 2018

I’ve also provided the Arduino source code I used in my setup, for both Relay control as well as WS2811 RGB LED control.
This software interfaces with Vixen 3 running on a computer in my garage and allows Vixen to talk to the Arduinos and control my display.