The Pi Juice Hat is an amazing portable power solution for every Raspberry Pi project and I’ve finally gotten my hands on one all I can say is I wish I got one sooner! Basically, its an uninterrupted power supply for the Raspberry Pi and it even works with RetroPie!
Technology
ATOMIC Pi – A high power alternative to RPi
We’re RPi lovers, and the UP board is nice… but it’s about price and performance. We feel there’s a market for a $34 Atom maker board. Thus was born the ATOMIC Pi.
- Genuine Intel Atom x5-Z8350 quad core with 2M Cache. Runs up to 1.92GHz with a 480MHz GPU. Eats RPi for dessert. Beats some desktops.
- Loaded with memory: 2GB DDR3L-1600, 16GB eMMC, slot for SD expansion (up to 256Gb)
- Full HDMI port with Intel HD Graphics & audio out
- USB 3.0 and USB 2.0 ports
- Fast dual band WiFI b/g/n 2.4 & 5GHz WiFi RT5572 IPX connectors on board
- Bluetooth 4.0 CR8510
- Gigabit hardwired RJ45 Ethernet RTL8111G
- 9-axis inertial navigation sensor with compass BNO055
- TTL serial debug and expansion serial ports up to 3.6Mbps
- Real time clock & battery
- JST style connectors and a 26-pin header for power & GPIO.
- Runs on 5V. Typically 4-15 watts.
- Legitimate licensed BIOS boots from SD, USB, or Ethernet. Linux comes preloaded… Yes, it’ll run Win10 64 bit.
- Optional breakout shield with screw terminals for easy wiring
- Well documented, find specs & files here.
- Our campaigns aren’t fancy, but we ship on schedule. Check out our feedback.
- What will you make with it?

NASA hack blamed on unauthorized Raspberry Pi
An insecure and unauthorized Raspberry Pi device has been blamed for a 2018 security breach in NASA’s Jet Propulsion Laboratory (JPL), a department plagued with cyber security vulnerabilities, according to a new report from NASA’s Office of Inspector General.
The security breach in question saw hackers target a NASA employee’s Raspberry Pi device, which wasn’t authorised to connect to the JPL’s network, and make off with 500MB of data from one of its major mission systems.
This was just one of the more recent incidents from the past ten years of “notable cyber security incidents that have compromised major segments of its IT network,” according to the report.

Best NAS for Plex – 2019
Best Plex Media Server NAS to Buy in 2019
If you are looking to upgrade your multimedia setup in 2019, chances are that you have already heard of the great multimedia application, Plex Media Server (PMS), that allows you to access all your movies and boxsets anywhere in the world, on almost any device! Plex is supported by everything from Smart TVs and Consoles, through to iOS and Android Phones – this incredibly accessible and intuitive media application provides all your owned media to you, as well as dressing it with titles, descriptions, background studio information, cast lists and recommendations for other shows! It is the perfect multimedia tool for those that want the colourful and information user interface similar to Netflix and Amazon Instant, but want to enjoy their own media, rather than stream/rent media from an online source! If you are looking to build your perfect Plex Media Server, it is highly recommended that you use a Network Attached Storage (NAS) drive. This affordable server solution for plex means you have a discreet solution that is easy to setup, easy to forget and will just run in the corner of a room/cupboard as your multimedia centre and let you access all your films, box sets and home movies ANYWHERE in the world. However, choosing the right NAS for a plex media server can be difficult. Big brands such as Synology, QNAP, Asustor, WD and Netgear all have a range of NAS drives available that all promise to support the Plex Media Server application (which is FREE), but each performs better or worse than another. So today, I want to discuss the Top Plex Media Server NAS from each brand, at £500, £1000 and £2000+.

Apple, Google, and Facebook Are Raiding Animal Research Labs
Neuroscientists studying birds, mice, and fish are landing seven-figure salaries to help advance artificial intelligence, self-driving cars, and more.
Jaguar is a mouse. He lives at Harvard’s Rowland Institute, where, from time to time, he plays video games on a rig that looks like it belongs in A Clockwork Orange. Metal bars position him inside a small platform in front of a metal lever; his mission is to find a virtual box’s edges by feel. To do this, he reaches with his right paw to grab the joystick, which can rotate 360 degrees, and maneuvers it until he feels feedback from the machine. When he reaches the right target area—say, an edge of the box—a tube rewards him with a dribble of sugar water.

A 3D-Printed, Computer-Controlled Loom
Manual looms have existed for so long that nobody really knows exactly when they were invented, but they’ve been an important tool for as long as anyone remembers. During the industrial revolution, powered looms were invented and made textiles cheaper to produce than ever before. Then, in the digital age, computer-controlled looms became popular because they could weave new patterns at the push of a button. Despite being operated by a computer, however, they’re still very complex machines with many parts.
How Adam Savage built a real Iron Man suit that flies
CNet went behind the scenes with former MythBusters star Adam Savage for his new series Savage Builds. In the first episode Adam builds a titanium Iron Man suit modeled directly from Marvel Studios, with the hopes of actually flying it. Savage Builds airs on the Discovery Channel before airing again on the Science Channel.
Sony’s Handheld PC from 2006
15 years ago, it was an open question as to whether PCs would get smaller, or if smartphones would get smarter. Sony jumped in on the UMPC craze with the Vaio UX line, a family of PCs you could hold in your hand.
I found wireless LEDs – no batteries needed! in Akihabara, Tokyo
I found these amazing wireless LEDs in Akihabara(aka Akiba) in Tokyo that light up wirelessly – with no wires or batteries! And I got them working on a standard phone wireless charger!
Bisqwit wrote a Raytracer for DOS, 16 VGA colors
In this tool-assisted education video I create a raytracer from scratch. The raytracer renders in 16-color VGA palette at 640×480 resolution.