(almost) Fully 3D printed tank! This design is easy to print on any hobby-grade 3D printer with no support material needed.
Additional hardware needed:
– 5010 360kV Brushless motors
– 8mm shafts 400mm (I recommend using hardened steel bearing rods)
– M3X12mm Hex Socket Cap Head Self-tapping Screw
– M3X20mm Hex Socket Cap Head Self-tapping Screw
– 503 Steel music wire 0.055″
– 608-ZZ Ball Bearing 8x22x7mm
– 4mm Steel Shafts for gearbox
– F694zz Flanged Ball Bearings 4*11*4mm for gearbox
– 1/2″ or 3/4″ wood screws – Wood
