In this post I’ll go over what I would consider to be the most important aspects to know while building your very own RetroPie on a Raspberry Pi as it’s not all as straight forward as you may think.
There are many posts out on the net describing just how to setup a RetroPie on a Raspberry Pi but I notice that most of them take you through the obvious, generic setup steps without going in to too much detail about any issues you may come across along the way..
After spending three solid months of building my SD card image and creating my very own kit, I came across some unforeseen hurdles along the way and I would like to share with you my experiences and problems and how I overcome them.
