Does the HD Link Cable for Sega Genesis from Pound Technology provide the best image quality for the cheapest price?
https://www.poundtechnology.com/genesis
Month: August 2019
How to Overclock Raspberry Pi 4 To 2.0Ghz! All 4 Cores – With Benchmarks
Warning Follow this tutorial at your own risk! The Raspberry Pi 4 can now be overclocked to 2GHZ on all 4 cores! Its only a 500Mhz overclock but it actually a really nice performance boost for the pi4 and its the highest clocks I’ve ever seen on any Raspberry Pi!
So in this video, I show you how to overclock the Pi 4 up to 2.0Ghz and I also run some benchmarks and test’s to show you how much perforce we gained with this new Overclock on the Raspberry Pi 4.
Buy Raspberry Pi 4 – 2GB
Buy Raspberry Pi 4 – 4GB
BASF launches Ultrafuse 316L metal 3D printing filament
The additive manufacturing arm of global chemical company BASF has formally launched its metal-polymer 3D printing filament onto the market.
First introduced last year, Ultrafuse 316L is said to enable simple and cost-efficient production of full metal prototypes, tooling and end-use parts using any extrusion-based 3D printer.
Build a Handheld RetroPie Gaming Console No Solder SUPER EASY!
In this video, ETA Prime will show you how to build a super easy no solder battery powered Raspberry Pi handheld running RetroPie.
Is the Raspberry Pi 4 really that bad? Using the Rasperry Pi 4 for 3D Printing.
The Raspberry Pi 4 is out! If you’ve read the first impressions, you always hear about overheating and USB issues – but is it really that big of a deal? I test the Raspberry Pi 4 against the Raspberry Pi 3 Model B and against the very first Raspberry Pi and the results are stunning to say the least.
CORRECTION: The Choetech USB cable only worked with the Huawei supply, not the Anker one.
Which LAYER HEIGHT gives you the STRONGEST 3D prints?
Does thickness matter? Today we’ll find out which layer height you should choose to get the strongest prints! I printed test specimens with layer heights from 0.05mm to 0.40mm and measured their strength.
The Giant Board — Linux on a Feather
The Giant Board is a single-board computer running Linux crammed into an Adafruit Feather form factor. I’ve been waiting for this one since September last year. However it now looks like the board is almost here, with the first hand-built boards ready to go out to early adopters really soon.
EON Super 64 – Rerez
Does EON’s new Super 64 get the best looking image possible on the Nintendo 64?
Caution: This will only work on North American and Japanese N64 consoles as of the making of this video.
How Install And Setup Lakka On the Raspberry Pi 4
In this video I show you how to install and setup Lakka “Retroarch OS” on the Raspberry Pi 4. This will allow you to play your favorite retro games on the Pi4, Keep in mind that as of making this video the Pi4 is still very new and emulation performance will get much better over time.
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!
Raspberry Pi 4 Emulation Test Lakka – N64 Dreamcast PSP & More – August 2019
Just a quick Raspberry Pi 4 Emulation situation update video Number 2, Lakka is running on the Pi4 but it’s still really early and a lot of emulators are now working like N64 Dreamcast and PSP An Official RetroPie version for the Pi4 is not yet available as of making this video but I still wanted to update everyone on the Progress of RetroArach On the Raspberry Pi 4.