Last seen: May 15, 2024
A couple of notes; The 12v RGB LEDs I have been using are 3 LEDs per IC, thus you can only controller groups of 3 LEDs together. I love the brightne...
"Christmas" came early this past weekend. The first batch of PCBs was delivered yesterday on Labor Day! The fit is great! But of...
A few updates on the coding side. I've finished the Wifi portion, acting as an Access Point at initial boot, you can then connect to it and pull...
Just a quick update of what I will be working on next.I found a way to read and write to the "EEPROM" of the ESP8266, thus the goal will be when you f...
I've almost finished the base Arduino code.My main goal was to create a data structure that could be sent from the Android app to the ESP and change e...
Finally done!I decided to just hot glue the power switch into place, as this is more of a shelf item rather than one I will play.I still did install t...
I've modified the base just a hair. I raised the ceiling inside the parts area by 1mm, giving more room for everything.I've added a small indent o...
I just placed an order for a run of 50 PCBs. These will allow me to add the 8-pin pin header for the ESP-01, as well as the 3.3v Voltage regulator...
The final base design is DONE! Everything test fitted, and works perfect. The legs and LED strip are friction fit, and are firm and stable once it's...
Another day, more changes and progress!I've opted to use 20mmx300mm extruded Aluminum square tubing for the legs/feet. This will save a TON in 3D prin...
Well, I've opted for a smaller more simple design for the 3D printed base. The prior design was abit too big, bulky and long to print. This ne...
Always check, before you place an order.. I guess I already had a collection of AMS1117 3.3v DC Regulators, so I broke one out and hooked up everythin...
The U channel came in and I've since started taking measurements to make a fitted base, here is the progress so far. The U channel and diffuser slid...
Last time I looked into shipping outside of the US, it was $30+USD to ship to Canada. So I assume it may be fairly pricey sadly. First best option w...