PinkyPi – DIY Electronics Kit

Description

Looking to build your own PinkyPi but you don’t want to track down each individual part needed? This PinkyPi DIY Electronics Kit is for you!

This kit does NOT include the display/button hat, RaspberryPi Zero and SD card.

This kit DOES include the following;

TP4056 – Charging circuit (with the 0603 4.7kOhm swap already completed for you)
23 watt Audio Amp
10k potentiometer
270 ohm resistor
33nf capacitor
Micro speaker
500mAh battery*
Power switch
4x 6mm screws**
4x 8mm screws**
4x 8mm female/female standoffs**
4x 10mm male/female standoffs**

*Battery size,shape and capacity is subject to change with any updates to the PinkyPi project.
**Screw and standoff sizes are subject to change with any updates to the PinkyPi project.

PinkyPi NES Build